Multi-link operation (MLO) is a new and essential mechanism of IEEE 802.11be Extremely High Throughput (Wi-Fi 7) that can increase throughput and decrease latency in Wireless Local Area Networks (WLANs). The MLO enables a Multi-Link Device (MLD) to perform Simultaneous Transmission and Reception (STR) in different frequency bands. However, not all MLDs can support STR due to cross-link or in-device coexistence interference, while an STR-unable MLD (NSTR-MLD) can transmit multiple frames simultaneously in more than two links. This study focuses on the problems when NSTR-MLDs share a link with Single-Link Devices (SLDs). We propose a Contention-Less Synchronous Transmission (CLST) mechanism to improve fairness between NSTR-MLDs and SLDs while increasing the total network throughput. The proposed mechanism classifies links as MLD Dominant Links (MDLs) and Heterogeneous Coexistence Links (HCLs). In the proposed mechanism, an NSTR-MLD obtains a Synchronous Transmission Token (STT) through a virtual channel contention in the HCL but does not actually transmit a frame in the HCL, which is compensated for by a synchronous transmission triggered in the MDL. Moreover, the CLST mechanism allows additional subsequent transmissions up to the accumulated STT without further contention. Extensive simulation results confirm the outstanding performance of the CLST mechanism in terms of total throughput and fairness compared to existing synchronous transmission mechanisms.

In this study, we address the problem of downlink throughput degradation in dense wireless local area networks (WLANs) based on the IEEE 802.11ax standard. We demonstrate that this problem essentially results from the asymmetric characteristic of carrier sense multiple access between downlink and uplink transmissions in infrastructure WLANs, and it is exacerbated by a dynamic sensitivity control algorithm that aims to improve spatial reuse (SR) in IEEE 802.11ax. To solve this problem, we propose the <i>interference-aware two-level differentiation</i> mechanism consisting of the <i>dual channel access</i> (DCA) and <i>supplemental power control</i> (SPC) schemes. The proposed mechanism introduces a new measure called a spatial reusability indicator, which roughly estimates the signal-to-interference ratio from the received signal strength of beacon frames. Based on this measure, stations (STAs) are classified into the following two categories: <i>spatial reusable STAs</i> (SR-STAs) and <i>non-spatial reusable STAs</i> (NSR-STAs). Because SR-STAs are more robust to interference than NSR-STAs, the DCA scheme prioritizes transmissions to SR-STAs over those to NSR-STAs by using differentiated carrier sensing thresholds. Moreover, the SPC scheme selectively increases the transmission power to NSR-STAs to compensate for transmission failure due to interference. By combining the SPC and DCA schemes, the proposed mechanism effectively differentiates the downlink transmissions to SR-STAs and NSR-STAs in terms of channel access and transmission power, and it can boost the possibility of successful SR. The proposed mechanism can be easily implemented in IEEE 802.11ax without any complex calculation or significant signaling overhead. Moreover, we provide a practical guideline to determine appropriate parameter values for use in the proposed mechanism. The extensive simulation results obtained in this study confirm that the proposed mechanism increases the downlink throughput by more than several times without decreasing the overall throughput, compared to the existing mechanisms, and it maintains fairness between SR-STAs and NSR-STAs in terms of the ratio of successful transmission.