Study on Machinability and Tool Wear Control in Cryogenic and MQL-Assisted Machining
연구 내용
극저온 냉각과 최소량 윤활 조건을 제어해 티타늄 합금 및 주철의 절삭성, 공구마모, 표면거칠기를 평가하고 열·마찰 메커니즘을 규명하는 연구
극저온 냉각과 MQL(최소량 윤활) 분사 조건을 조합하여 Ti-6Al-4V 및 compacted graphite iron의 공구마모와 가공면 특성을 분석하는 연구를 수행합니다. 절삭력, 공구 마모 거동, 표면 거칠기 변화를 중심으로 냉각에 의한 열전달 억제와 윤활에 의한 마찰 감소 효과를 분리해 해석합니다. 또한 액체질소 분사에 따른 취성 강화 및 냉각 균일성 변화가 공정 안정성에 미치는 영향을 실험과 수치 평가로 검토합니다.
관련 연구 성과
관련 논문
5편
관련 특허
0건
관련 프로젝트
0건
연구 흐름
초기에는 liquid nitrogen을 냉각매체로 적용하여 compacted graphite iron의 절삭력과 표면 거칠기 변화를 파악하는 실험을 수행했습니다. 이후 Ti-6Al-4V를 대상으로 cryogenic cooling과 MQL을 동시에 적용하여 장거리 가공에서의 절삭력 저감과 마모 진행 양상을 비교했습니다. 2023년에는 냉각 효과를 수치적으로 평가하며 공정 변수의 민감도를 확인하는 방향으로 확장했습니다. 최근에는 간접 극저온 가공에서의 윤활·마찰 거동을 포함한 정량 평가를 통해 공구 수명 연장 조건을 도출하는 연구를 진행하고 있습니다.
활용 가능성
활용 가능성은 알앤디써클 특화 AI 에이전트가 생성한 내용으로, 실제 연구 가능 여부는 연구실과의 논의가 필요합니다.
관련 논문
구분
제목
Tool wear evolution and chip formation of the Ti-6Al-4V end milling under cryogenic cooling and minimum quantity lubrication conditions
Numerical evaluation of the cryogenic cooling effect on compacted graphite iron during end-milling
Study on the Effect of MQL Spraying Condition on the Machinability in Titanium Cryogenic Machining
Study on the Machinability of Cryogenic Milling for Compacted Graphite Iron
Experimental and Numerical Study on Tribological Behavior and Machinability in Titanium Indirect Cryogenic Machining with Minimum Quantity Lubrication