발행물

논문
특허
저서
컨퍼런스

전체 논문

238

51

Electrical Sintering Characteristics of Inkjet-printed Conductive Ag Lines on a Paper Substrate
S. Jang, D.J. Lee, D. Lee, J.H. Oh
Thin Solid Films, 2013

52

Control of Surface Wettability for Inkjet Printing by Combining Hydrophobic Coating and Plasma Treatment
H.Y. Park, B.J. Kang, D. Lee, J.H. Oh
Thin Solid Films, 2013

53

Investigation of contact force distributions and dynamic behavior of an automobile windshield wiper blade system
S.H. Lee, Y.H. Kim, J. Sung, K.C. Shin, J.H. Oh
Proceedings of the Institution of Mechanical Engineer, Part D: Journal of Automobile Engineering, 2013

54

Two-step flash light sintering process for crack free inkjet-printed Ag films
S.H. Park, S. Jang, D. J. Lee, J.H. Oh, H.S. Kim
Journal of Micromechanics and Microengineering, 2013

55

Direct fabrication of microelectrodes on a polymer substrate using selective ultrashort pulsed laser ablation of inkjet-printed Ag lines
S.H. Lee, D.J. Lee, C.K. Lee, Y.H. Lee, S.T. Wereley, J.H. Oh
physica status solidi A, 2012

56

All-inkjet-printed electrical components and circuit fabrication on a plastic substrate
B.J. Kang, C. Lee, J.H. Oh
Journal of Microelectronic Engineering, 2012

57

Arbitrary, Complex Cell Patterning via Inkjet Printing of a Cell Membrane-Anchoring Polymer
H.I. Yoon, J.S. Choi, B.K. Lee, J.H. Oh, Y.W. Cho
Macromolecular Research, 2012

58

Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate
D.J. Lee, S.H. Park, S. Jang, H.S. Kim, J.H. Oh, Y.W. Song
Journal of Micromechanics and Microengineering, 2011

59

Prediction of Surface Roughness in Magnetic Abrasive Finishing Using Acoustic Emission and Force Sensor Data Fusion
J.H. Oh, S.H. Lee
Proceedings of the Institution of Mechanical Engineers, Part B: J. of Eng. Manu., 2011

60

Effects of Plasma Surface Treatments on Inkjet-Printed Feature Sizes and Surface Characteristics
B.J. Kang, Y.S. Kim, Y.W. Cho, J.H. Oh
Microelectronics Engineering, 2011