Thermodynamic Investigation on the Formation of Inclusions containing MgAl2O4 Spinel during 16Cr-14Ni Austenitic Stainless Steel Manufacturing Processes
Park
Mater. Sci. Eng. A, 2008
2
Characterization of Non metallic Inclusions in High Manganese and Aluminum-Alloyed Austenitic Steels
Park et al.
Metall. Mater. Trans. A, 2012
3
Effect of CaO/Al2O3 ratio of ladle slag on formation behavior of inclusions in Mn and V alloyed steel
Shin and Park
ISIJ Int., 2018
4
Characterization of non-metallic inclusions and their influence on the mechanical properties of a FCC single-phase high-entropy alloy
Choi, Lim, Na, Glatzel and Park
J. Alloys & Compd., 2018
5
Effect of nitrogen on grain growth and formability of Ti-stabilized ferritic stainless steel
Lee, Kim and Park
Scientific Reports, 2019
6
Effect of initial iron content in a zinc bath on the dissolution rate of solid iron during hot dip galvanizing process
Lee, Pak and Park
Metall. Mater. Trans. A, 2017
7
Effect of atmosphere and slag composition on the evolution of PH3 gas during cooling of reducing dephosphorization slags
Shin and Park
ISIJ Int., 2013
8
Structure-Viscosity Relationship of Low-silica Calcium Aluminosilicate Melts
Kim and Park
ISIJ Int., 2014
9
Effect of Direct Reduced Iron (DRI) on Dephosphorization of Molten Steel by Electric Arc Furnace Slag
Heo and Park
Metall. Mater. Trans. B, 2018
10
Interfacial reaction between magnesia refractory and “FeO”-rich slag: Formation of magnesiowüstitie protective layer