Fuel Cell Test Station #3
Category Fuel cell Objectives Single & Stack cell performance test Wet/Dry cycle test
Fuel Cell Test Station #4 / 4ch
Category Fuel cell Objectives Single & Stack cell performance test Wet/Dry cycle test Start-up/Shutdown test
Water electrolysis Test Station
Category Water electrolysis Objectives Single & Stack cell performance test
HCP-803
Category Electrochemical analysis Objectives Equipment for electrochemical measurement Ex) I-V curve, Linear Sweep Voltammetry (LSV), Cyclic Voltammetry (CV), Electrical Impedance spectra (EIS), etc Specification i range ~±80 A
pH/ISE Benchtop Meter
Category Electrochemical analysis Objectives Measure pH, ion concentration, mV, relative mV or ORP with temperature Specification Resolution : pH(0.001,0.01,0.1), mV(0.1 or 1mV), ISE(0.01ppm) Accuracy : pH(0.002 pH), mV(0.2 mV or 0.05%), ISE(0.2 or 0.05%)
GB-882(Optical Microscope), GB-742(CCD camera)
Category Analysis Objectives Surface Observation (Pattern, Geometry, etc) Specification Scale: x100-20000
WBA-220(Standard Analytical Balance)
Category Analysis Objectives Sample weight measurement Specification Weight range : 0.1 mg - 220 g Read out : 0.1 mg
JAC-5020 (Ultra-sonication)
Category Dispersion Objectives Dispersion Specification max.Power : 500W Frequency : 40 kHz
HD-4100 (Homogenizer), TS 106 (Probe)
Category Dispersion Objectives Dispersion Specification max.Power : 100W Frequency : 20 kHz Amplitude : 155㎛
MaXshake VM30 (Vortex)
Category Dispersion Objectives Dispersion Specification Speed range : 3300 RPM