Fabrication and characterization of a Ni-YSZ anode support using high-frequency induction heated sintering (HFIHS)
J.Y. Yoo, I.J. Shon, B.H. Choi, K.T. Lee
Ceram. Int., 2011
72
Preparation of porous Ni–YSZ cermet anodes for solid oxide fuel cells by high frequency induction heated sintering
J.Y. Yoo, C.K. Cho, I.J. Shon, K.T. Lee
Mater. Lett., 2011
73
Photoluminescence properties of sesquioxide doped ceria synthesized by modified sol-gel route
M.K. Rath, S.K. Acharya, B.H. Kim, K.T. Lee, B.G Ahn
Mater. Lett, 2011
74
Crystal chemistry and electrochemical properties of Ln(Sr,Ca)3(Fe,Co)3O10 intergrowth oxide cathodes for solid oxide fuel cells
J.H. Kim, K.T. Lee, Y.N. Kim, A. Manthiram
J. Mater. Chem., 2011
75
Characterization of Pb2Ru2-xBixO7 (x = 0, 0.2, and 0.4) pyrochlore oxide cathode materials for intermediate temperature solid oxide fuel cells
K.W. Song, K.T. Lee
J. Ceram. Process. Res., 2011
76
Characterization of NdSrCo1-xFexO4+δ(0≤x≤1.0) intergrowth oxide cathode materials for intermediate temperature solid oxide fuel cells
K.W. Song, K.T. Lee
Ceram. Int., 2011
77
One step synthesis and densification of nanocrystalline TaSi2-Si3N4 composite from mechanically activated powders by high-frequency induction-heated combustion
H.K. Park, J.H. Park, J.K. Yoon, K.T. Lee, I.J. Shon
J. Electroceram., 2009
78
Rapid synthesis and consolidation of TiSi2 by pulsed activated combustion
B.R. Kim, K.S. Nam, J.M. Doh, K.T. Lee, I.H. Shon
J. Ceram. Process. Res., 2009
79
Effect of Fe2O3 on properties and densification of Ce0.8Gd0.2O2-δ by PCAS
K.T. Lee, D.K. Kim, J.H. Park, I.J. Shon
Ceram. Int., 2009
80
Effect of Fe2O3 addition on consolidation and properties of 8 mol% yttria-stabilized zirconia by high-frequency induction heated sintering (HFIHS)
I.J. Shon, I.K. Jeong, J.H. Park, B.R. Kim, K.T. Lee