발행물

전체 논문

285

81

Effect of interlayer cooling on the microstructure and mechanical properties of titanium alloys fabricated using directed energy deposition
H.J. Lee, P.L. Narayana, J.H. Kim, C.H. Park, J.-K. Hong, J.-T. Yeom, T. Lee*, S.W. Lee*
Journal of Alloys and Compounds, 2023

82

Prediction of Cryogenic- and Room-Temperature Deformation Behavior of Rolled Titanium using Machine Learning
S. Cheon, J. Yu, J.G. Kim, J.S. Oh, T.-H. Nam, T. Lee*
Transactions of Materials Processing, 2023

83

Fused Deposition modeling of Iron-Alloy using Carrier Composition
H.R. Chothe, J.H. Lim, J.G. Kim, T. Lee, T. Nam, J.S. Oh*
Elastomers and Composites, 2023

84

Optimizing interlayer cooling for SUS316L thin wall fabricated by directed energy deposition
S. Hwang, W.-J. Oh, D.-H. Kim, J.G. Kim, J.S. Oh, T.-H. Nam, C.-S. Kim, T. Lee*
Journal of Materials Research and Technology, 2023

85

Twinning-induced Plasticity Mechanism of α″-martensitic Titanium Alloy
H.J. Lee, J.-H. Kim, C.H. Park, J.-K. Hong, J.-T. Yeom, T. Lee, S.W. Lee*
Acta Materialia, 2023

86

Gaussian process regression-based Bayesian optimization of the insulation-coating process for Fe-Si alloy sheets
S.M. Park, T. Lee, J.H. Lee*, J.S. Kang, M.S. Kwon
Journal of Materials Research and Technology, 2023

87

Microstructures and mechanical behavior of Ti-(38+x)Ni-12Cu (at%) (x=0∼3) alloys
J.-H. Kim, J.-H. lim, W.-T. Lee, J.G. Kim, J.S. Oh, T. Lee, S. Li*, T.-H. Nam*
Journal of Alloys and Compounds, 2023

88

Precipitation of metastable intermetallic phases and nanoindentation behaviors of a Ti-20Zr-9 Nb-4Sn (at%) alloy during aging treatment
W.-T. Lee, J.-T. Yeom, J.G. Kim, J.S. Oh, T. Lee, Y. Liu, S. Li*, T.-H. Nam*
Journal of Alloys and Compounds, 2023

89

Heterogeneous-structured Ti-6Al-4V with enhanced mechanical properties in monotonic and cyclic deformation modes
G. Kim, T. Lee*, S.A.A. Shams, J.N. Kim, S.W. Choi, J.K. Hong, C.S. Lee*
Journal of Materials Research and Technology, 2023

90

Fabricating Efficient and Biocompatible Filament for Material Extrusion-Based Low-Cost Additive Manufacturing: A Case Study with Steel
T.K. Sinha, H.R. Chothe, J.H. Lim, J.G. Kim, T. Lee, T. Nam*, J.S. Oh*
Journal of Materials Engineering and Performance, 2023