Detection - EMCCD cameras

Two Andor iXon 897 EMCCD cameras are dedicated to winter and summer chambers.  Potometrics Evolve 512 Delta EMCCD camera  is shared by the resistive heater chamber and TEC chamber.

Temperature Controlled Reflective Polarizing Microscope

For the studies of crystallization kinetics of glassforming materials.  Temperature is controlled by either a 1. Home-built closed chamber or 2. Linkam stage.

Temperature Controlled Reflective Polarizing Microscope - Homebuilt closed chamber

vacuum (~ xx mtorr) to nitrogen-rich environment, cartridge heater controls temperature from room temperature to 350°C.

Temperature Controlled Reflective Polarizing Microscope - Linkam stage (Linkam, THMS600)

nitrogen-rich environment, Liquid nitrogen active cooling used in a temperature range of < -195°C to 600°C with heating/freezing rates of 150°C/min

Monochrometer and spectrometer setup

Monochrometer(Dongwoo Optron xxxx) and Spectrometer(xxxx equiped with Andor xxxxx) setup.

Monochrometer and spectrometer setup - Standard solution and film UV-Vis and fluorescence

Monochrometer and spectrometer setup - Temperature-controlled closed chamber

Monochrometer and spectrometer setup - Angle-dependent fluorescence measurements

Temperature Controlled Spectroscopic Ellipsometer

Nanoview  MG-1000 spectroscopic ellipsometer equipped with temperature and environment controlled stages.

Temperature Controlled Spectroscopic Ellipsometer - Homebuilt closed TEC chamber

vacuum (~ 10 mtorr) to nitrogen-rich environment, cartridge heater controls temperature from room temperature to 300°C with TEC cooled air cooling.