발행물

전체 논문

168

21

Analysis of the Physical and Mechanical Properties of Injected High-Density Polyurethane from Laboratory Experiments and Field Tests
Choi, J. Y., Kim, D. H.
Journal of Engineering Geology, 2021

22

Development of Alkali Stimulant-Based Reinforced Grouting Material from Blast Furnace Slag Powder
Seo, H., Jeong, S. G., Kim, D. H.
Journal of Engineering Geology, 2021

23

Seismic Response of Flat Ground and Slope Models through 1 g Shaking Table Tests and Numerical Analysis
Jin, Y., Kim, H. Y., Kim, D. H., Lee, Y. H., Kim, H. S.
Applied Sciences(SCI-E), 2021

24

The Determination of Pullout Parameters for Sand with a Geogrid
Park, K. H., Kim, D. H., Park, J. B., Na, H. H.
Applied Sciences(SCI-E), 2020

25

Development of Water-resistant Grout according to Blast Furnace Slag Fine Powder and Calcium Hydroxide Content
Seo, H., Park, K. H., Jeong, S. G., Kim, D. H.
Journal of Engineering Geology, 2020

26

Effect of the Soil Box Boundary Conditions on Dynamic Behavior of Model Soil in 1g Shaking Table Test
Kim, H. Y., Kim, D. H., Lee, Y. H., Kim, H. S.
Applied Sciences(SCI-E), 2020

27

A Study on the Increase of Bearing Capacity of Soft Ground in Shallow Foundation Using High Density Rapid Expansion Material
Ro, E. C., Kim, D. H.
Journal of Engineering Geology, 2020

28

Dynamic Response Characteristics of Embankment Model for Various Slope Angles
Kim, H. Y., Jin, Y., Lee, Y. H., Kim, H. S., Kim, D. H.
Journal of Korean Geosynthetics Society, 2020

29

Applicability of Bearing Capacity for Single Drilled Shaft Using Empirical equation based on Ground Condition.
Kim, D. H., Jeong, S. G.
Journal of Korean Geosynthetics Society, 2019

30

Bearing Capacity Characteristics of Pile for Reinforcement of Lateral Resistance.
Kim, D. H., Jeong, S. G.
Journal of advanced engineering and technology, 2019