발행물

전체 논문

689

281

Liquid crystal devices incorporating transparent Zn, Sn, co-doped In2O3 electrodes prepared by direct inkjet-printing of nanosized particles
Kyung-Won Park, Sin-Bi Kang, Jin-A Jeong, Suk-Won Choi, Jihoon Kim, In-Kyu You, Yong Suk Yang, Han-Ki Kim
J. Phys. D: Applied Phys., 2013

282

Near infra-red transparent Mo-doped In2O3 by hetero targets sputtering for phosphorescent organic light emitting diodes
Yong-Hee Shin, Sin-Bi Kang, Sunghun Lee, Jang-Joo Kim, Han-Ki Kim
Organic Electronics, 2013

283

Correlation between Ti source/drain contact and performance of InGaZnO-based thin film transistors
Kwang-Hyuk Choi, Han-Ki Kim
Appl. Phys. Lett., 2013

284

Transparent amorphous In-Si-O films for flexible organic solar cells
Hye-Min Lee, Sin-Bi Kang, Kwun-Bun Chung, Han-Ki Kim
Appl. Phys. Lett., 2013

285

Ag nanowire-embedded ITO films as a near-infrared treansparent and flexible anode for flexible organic solar cells
Kwang-Hyuk Choi, Jihoon Kim, Young-Jin Noh, Seok-In Na, Han-Ki Kim
Solar Energy Materials and Solar Cells, 2013

286

Effects of rapid thermal annealing on electrical, optical and structural properties of Ni-doped In2O3 anodes for bulk hetero junction organic solar cells
Jun Ho Kim, Tae-Yeon Seong, Han-Ki Kim
J. Vac. Sci. Technol. A, 2013

287

Transparent and flexible PEDOT:PSS electrodes passivated by thin IZTO film using plasma-damage free linear facing target sputtering for flexible organic solar cells
Ju-hyun Lee, Hyun-Su Shin, Seok-In Na, Han-Ki Kim
Solar Energy Materials & Solar Cells, 2013

288

Rapid thermal annealing effect on the characteristics of ZnSnO3 films prepared by RF magnetron sputtering
Yoon-Young Choi, Seong Jun Kang, Han-Ki Kim
Current Applied Physics, 2012

289

Low energy deposition of InGaZnO channel layer using linear facing target sputtering for oxide TFTs
Hyun-Su Shin, Kwang-Hyuk Choi, Han-Ki Kim
Current Applied Physics, 2012

290

Organic solar cells fabricated on inkjet-printed indium tin oxide electrodes
Han-Ki Kim, In-Kyu Yoo, Jae Bon Koo, Sung-Ho Kim
Surface & Coatings Technology, 2012